Datahallar

Fiber Optic Cleaner Pen

Fiber Optic Cleaner Pen

Fiber Optic Cleaner Pen is designed to specially work well with the female connectors, this instrument cleans the ferrule end faces removing dust, oil, and other debris without nicking or scratching the end face.

Fiber Optic Cleaner Box

Fiber Optic Cleaner Box

PFT-CL-BXA00-00 is an essential accessory to maintain and guarantee good quality of fiber optic connection. It is the best non-alcohol cleaning method for various fiber optic terminations which is simply and swiftly used. Box tape replacement is offered to make sure low cleaning cost. Suitable for connector such as SC、FC、MU、LC、ST、D4 、 DIN、E2000 etc.

MPO Power Meter & MPO Light Source

MPO Power Meter & MPO Light Source

PTE-MP-FMP10-00 MPO Power Meter & PTE-MP-FMS10-00 MPO Laser Source are high cost performance testers to test MPO connectors and patchcords and display all the test results Intuitively on the TFT LCD. They can perform polarity test and frequency identification.

Standalone Chassis for PCF-CH01-02 Series

Standalone Chassis for PCF-CH01/02 Series

All of PCF series rack mount cards are hot-swappable and can be installed in a 20 slots (2U), or 8 slots (1U) rack-mountable chassis with any combination of redundant hot swappable AC, 24VDC or 48VDC power supplies, providing a scalable solution that is space-efficient and cost-effective. The rack mount cards can also be mounted in 4 slots, 2 slots or 1 slot standalone housing with fixed AC/DC powered chassis. The rack mount cards of PCF series provide telecommunication solutions for most applications. PHYBER offers a universal and cost-efficient transmission series for a variety of fiber optic technologies (Multimode, Single mode, WDM, CWDM) starting from converters to switchers, to modems and extending to intelligent voice/data multiplayer systems. The products are designed as rack mount cards in combination with various chassis types. The concept is to ensure an extremely variable mixture of products at low storage costs for spares.

10G 3R Transponder, SFP+ to SFP+

10G 3R Transponder, SFP+ to SFP+

The PCF-10-GSS00 is a 10G fiber to fiber 3R repeater and transponder. Based on a number of 10 Gigabit Fiber standards, these transponders support SFP+ to SFP+ (SS) fiber connections. The transponders are protocol transparent, providing 3R (Re-amplification, Re-shaping and Re-clocking) regeneration between these different optical module types. One of the major applications for this converter is in connecting proprietary transceiver equipment to CWDM or DWDM when these colored optical modules are not available for the proprietary equipment. With transparent bi-directional forwarding capability between the 2 fiber media, the PCF-10-GSS00 brings you the best and simplest solution for your 10G conversion between fiber and fiber.

40G QSFP+ to 4x 10G SFP+ Transponder

40G QSFP+ to 4x 10G SFP+ Transponder

The PCF-40-G1Q4S-00 is a 40G QSFP to 4x 10G SFP+ transponder that provides media conversion and distance extension for 40G over 10G links. The PCF-40-G1Q4S-00 meets the growing need for more bandwidth for data centers and enterprises. The emergence of high-end servers and Ethernet switches with 40G Ethernet interfaces increases the need for media conversion (multi-mode to single-mode) and link range extension. The PCF-40-G1Q4S-00 is hot-swappable with one QSFP slot QSFP 40G transceiver and four SFP+ slots for SFP+ 10G transceiver. The installation and setup is simple plug and play. PCF-40-G1Q4S-00 can be inserted into any powered Phyber chassis with QSFP and SFP+ transceivers required for the application.

MPO MTP Breakout Cable

MPO/MTP Breakout Cable

Phyber Networks MPO/MTP breakout cable assemblies, using the high density cable and MPO/MTP connector, utilizing fanout kit to assemble from trunk cable to generic fiber optic connectors such as LC, SC, FC, ST, MTRJ, etc. Available in 8/12/24/48 fiber versions as well as multi-mode (62.5/125, 10G OM2/OM3/OM4, Bend-insensitive fiber, etc.) and single mode (G652D, G657A1 etc.) fiber types.

MPO MTP Patchcord

MPO/MTP Patchcord

The Phyber’s MPO/MTP patchcord cable are simplex multi-fiber cable using the MPO/MTP connector in fiber count of 4, 8, 12, 24 or 48. They offer Male and Female MPO/MTP connectors on each end. Available in 4~48 fiber versions as well as multi-mode (62.5/125, 10G OM2/OM3/OM4, Bend-insensitive fiber, etc.) and single mode (G652D, G657A1 etc.) fiber types. With our highly integrated design and manufacturing capability, Phyber can also provide customized products and solutions to help customers for better opportunities. Our products are 100% tested at our factory to deliver optimal performance and reliability.

120G CXP MPO 850nm MMF-300m Transceiver

120G CXP MPO 850nm MMF-300m Transceiver

PHYBER’s GCX-MPO121-SR10C CXP transceiver modules is a high performance, low power consumption, long reach interconnect solution supporting 100G Ethernet, Infiniband QDR, DDR, SDR,1G/2G/4G/8G/10Gfiber channel and PCIe. It is compliant with the 120 Gbits Small Form factor Hot-Pluggable CXP-interface. PHYBER’s CXP transceiver modules is an assembly of 12 full-duplex lanes, where each lane is capable of transmitting data at rates up to 10.5Gb/s, providing an aggregated rate of 120Gb/s.

40G QSFP Dual LC CWDM SMF-10Km Transceiver (LR4)

40G QSFP Dual LC CWDM SMF-10Km Transceiver (LR4)

The GQS-SPO400-LR4C is a 4x10G hot pluggable optical transceiver. The Phyber technology enables the integration of 4 transmitters, 4 receivers and an optical MUX/DeMUX in to a small form factor package that delivers a 40 Gbps data link in a compact QSFP footprint. The optical connectivity is based on two SMF LC connectors, one for Tx and one for Rx. The Tx and Rx each consist of 410GB/sCWDM channels, whose wavelengths are in the 1300nm range. The QSFP-LR transceiver is designed for applications based on the IEEE 802.3ba 40BASE-LR4 standard of up to 10km reach.

40G QSFP MPO 850nm MMF-100m Transceiver (SR4)

40G QSFP MPO 850nm MMF-100m Transceiver (SR4)

The Phyber Technologies GQS-MP400-SR4C is a Four-Channel, Pluggable, Parallel, Fiber-Optic QSFP+ Transceiver for 40 Gigabit Ethernet Applications. This transceiver is a high performance module for short-range multi-lane data communication and interconnect applications. It integrates four data lanes in each direction with 40 Gbps bandwidth. Each lane can operate at 10.3125 Gbps up to 100 musing OM3 fiber or 150 m using OM4 fiber. These modules are designed to operate over multimode fiber systems using a nominal wavelength of 850nm. The electrical interface uses a 38 contact edge type connector. The optical interface uses an 12 fiber MTP(MPO) connector. This module incorporates Phyber Technologies proven circuit and VCSEL technology to provide reliable long life, high performance, and consistent service.

SFP+ Dual LC 1310nm SMF-10km Transceiver (LR)

SFP+ Dual LC 1310nm SMF-10km Transceiver (LR)

This1310nm DFB 10Gbps SFP+ transceiver is designed to transmit and receive optical data over single mode optical fiber for link length 10km. The SFP+ 10km module electrical interface is compliant to SFI electrical specifications. The transmitter input and receiver output impedance is 100Ohms differential. Data lines are internally AC coupled. The module provides differential termination and reduce differential to common mode conversion for quality signal termination and low EMI. SFI typically operates over 200mm of improved FR4 material or up to about 150mm of standard FR4 with one connector.

10G SFP+ Dual LC 850nm MMF-300m Transceiver (SR)

10G SFP+ Dual LC 850nm MMF-300m Transceiver (SR)

This 850nm VCSEL 10Gigabit SFP+ transceiver is designed to transmit and receive optical data over 50/125μm or 62.5/125μm multimode optical fiber.

120G CXP to 3x 40G QSFP+ Active Optical Cable

120G CXP to 3x 40G QSFP+ Active Optical Cable

CXP to 3xQSFP active optic cables are a high performance, low power consumption, long reach interconnect solution supporting 120G Ethernet, fiber channel and PCIe. It is compliant with the 120Gbits Small Form factor Hot-Pluggable CXP-interface and QSFP-interface. Phyber CXP to 3xQSFP is an assembly of 12 full-duplex lanes, where each lane is capable of transmitting data at rates up to 10Gb/s, providing an aggregated rate of 120Gb/s.

120G CXP Active Optical Cable

120G CXP Active Optical Cable

CXP-CXP active optic cables are a high performance, low power consumption, long reach interconnect solution supporting 120G Ethernet, fiber channel and PCIe. It is compliant with the 120Gbits Small Form factor Hot-Pluggable CXP-interface. Phyber CXP AOC is an assembly of 12 full-duplex lanes, where each lane is capable of transmitting data at rates up to 10Gb/s, providing an aggregated rate of 120Gb/s.

40G QSFP+ to 4x 10G SFP+ Passive Copper Cable

40G QSFP+ to 4x 10G SFP+ Passive Copper Cable

The QSFP+ to 4x SFP+ Passive cable assemblies are high performance, cost-effective for SFP+ and QSFP+ equipment interconnects. The Hybrid cables are compliant with SFF-8436 and SFF-8431 specifications. It offers a low power consumption and a short reach interconnect application. Each lane of the cable is capable of transmitting data at rates up to 10Gb/s, providing an aggregated rate of 40Gb/s.

40G QSFP+ to 8x LC Active Optical Cable

40G QSFP+ to 8x LC Active Optical Cable

Phyber QSFP+ to 8 x LC Connector Breakout Optical Cable area high performance, low power consumption, long reach interconnect solution supporting 40G Ethernet, fiber channel and PCIe. It is compliant with the QSFP MSA and IEEE P802.3ba 40GBASE-SR4. Phyber QSFP+ Breakout Cable is an assembly of 4 full-duplex lanes, where each lane is capable of transmitting data at rates up to 10Gb/s, providing an aggregated rate of 40Gb/s. QSFP+ Breakout Cable are suitable for short distances and offer a highly cost-effective way to connect with in racks and across adjacent racks. These breakout cables connect to a 40G QSFP+ port of a switch on one end and to four 10G SFP+ Transceivers of a switch on the other end.

40G QSFP+ to 4x10G SFP+ Active Optical Cable

40G QSFP+ to 4x10G SFP+ Active Optical Cable

Phyber QSFP to 4xSFP+ breakout Active Optical Cable offers IT professionals a cost-effective interconnect solution for merging 40G QSFP and 10G SFP+ enabled host adapters, switches and servers. For typical applications, users can install this splitter Active Optical cable between an available QSFP port on their 40Gbps rated switch and feed up to four upstream 10GbE-SFP+ enabled switches. Each QSFP-SFP+ splitter Active Optical cable features a single QSFP connector (SFF-8436) rated for 40Gbps on one end and (4) SFP+ connectors (SFF-8431), each rated for10-Gb/s, on the other.

40G QSFP+ Passive Copper Cable

40G QSFP+ Passive Copper Cable

The QSFP+ passive cable assemblies are high performance, cost effective I/O solutions for 40G LAN, HPC and SAN applications. The QSFP+ passive copper cables are compliant with SFF-8436, QSFP+ MSA and IEEEP802.3ba 40GBASE-CR4. It offers a low power consumption and a short reach interconnect application. Each lane of the cable is capable of transmitting data at rates up to 10Gb/s, providing an aggregated rate of 40Gb/s.

40G QSFP+ Active Copper Cable

40G QSFP+ Active Copper Cable

The QSFP+ cable assemblies are high performance, cost effective I/O solutions for LAN, HPC and SAN. The high speed cable assemblies meet and exceed Gigabit Ethernet, InfiniBand and Fiber Channel commercial temperature requirements for performance and reliability. The cables are compliant with InfiniBand Architecture, SFF-8436 specifications and provide connectivity between devices using QSFP ports.

40G QSFP+ Active Optical Cable

40G QSFP+ Active Optical Cable

QSFP active optic cables are a high performance, low power consumption, long reach interconnect solution supporting 40G Ethernet, fiber channel and PCIe. It is compliant with the QSFP MSA and IEEE P802.3ba 40GBASE-SR4. Phyber QSFPAOC is an assembly of 4 full-duplex lanes, where each lane is capable of transmitting data at rates up to 10Gb/s, providing an aggregated rate of 40Gb/s.

10G SFP+ Passive Copper Cables

The SFP+ passive cable assemblies are high performance, cost effective I/O solutions for 10Gb Ethernet and 10G Fiber Channel applications. SFP+ copper modules allow hardware manufactures to achieve high port density, configurability and utilization at a very low cost and reduced power budget. The high speed cable assemblies meet and exceed Gigabit Ethernet and Fiber Channel industry standard requirements for performance and reliability.

10G SFP+ Active Copper Cable

10G SFP+ Active Copper Cable

The SFP+ active cable assemblies are high performance, cost effective I/O solutions for 10Gb Ethernet and 10G Fiber Channel applications. SFP+ copper modules allow hardware manufactures to achieve high port density, configurability and utilization at a very low cost and reduced power budget. The high speed cable assemblies meet and exceed Gigabit Ethernet and Fiber Channel industry standard requirements for performance and reliability.

10G SFP+ Active Optical Cable

10G SFP+ Active Optical Cable

PHYBER SFP+ Active Optical Cables are direct-attach fiber assemblies with SFP+ connectors. They are suitable for very short distances and offer a cost-effective way to connect within racks and across adjacent racks. PHYBER SFP+ Active Optical Cables length is up to 300 meters on OM3 MMF.